Things to Think About When Determining Where to Put Your Fountain

50025coqn__08059.jpg One of the first things to consider when selecting a water fountain is exactly where you want to put it. Any high-traffic areas such as driveways, entryways, or roundabouts are perfect spots to install one.

Some types of fountains are intentionally built to lean against a wall. They can be attached against a wall, post, or fence by using a bar or a hook affixed to the back. Since the top part of your fountain is not stable on its own, make certain that it is secure against a wall to avoid damage caused by strong winds, wild animals, or other natural threats.

In open-air places like parks where people tend to sit and unwind for a few minutes, you will notice one other option – the garden sculpture style.

Easy-to-Fallow Tips to Hang a Wall Fountain

Enhance nearly any area with the addition of a wall fountain. The calming sound of the waterfall will de-stress and comfort. People tend to hang their wall fountains in entryways, but, in fact, they can be a wonderful addition to any room where everyone gathers. Although each model might have slight differences on how to hang it, the basic instructions are the same for all. Be sure that all the various pieces are used in assembling it. It will be necessary to connect the pump and tubing, and the base will need to be attached to the top portion. The directions should be read first to make sure it is assembled right. Generally, it is simple and easy. Note, however, that the directions for your individual model can vary slightly. The easiest way to make sure it is positioned correctly is to get someone to hold it where you want it while you mark the wall. To facilitate a proper line, use a level. It is advisable to mark both the bottom and the top positions. Wall fountains can be mounted in a couple of ways. You will see holes on the back side of the wall fountain which can be mounted directly onto the screws. Alternatively, you can affix brackets to the wall and use those. This last one is the more advisable method, especially if your fountain is large.

Determine where the brackets will go and then mark the precise spot on the wall. Bore pilot holes in the wall where you need to position the drywall anchors. Insert the anchors by carefully hammering them into the wall. Attach the brackets by ensuring they are straight and then screwing them into the wall with a drill or screwdriver. Hang your wall fountain by hanging it onto the brackets. Check to see that it is in the ideal position and secure on the brackets. When you are sure the unit is stable, add water. The pump should be fully immersed under water. The water will start to circulate as soon as you plug in your fountain. The water should fill the basin to within one inch of the upper end. Do not fill the basin all the way to the top or it will overflow when the pump is not on. The water level will rise because all of the flowing water will settle down at the base of the basin. Harm can be caused if the water is overly full and overflows down your wall.

Caring For Water Wall Fountains

An important facet to think about is the size of the outdoor wall fountain in relation to the space in which you are going to install it. In order to hold up its total weight, a solid wall is required. Therefore for smaller areas or walls, a more lightweight fountain is going to be more appropriate. An electrical socket near the fountain is needed to power the fountain.

Whatever the style of outdoor wall fountain you buy, they generally come with easy to follow, step-by-step instructions.

Most outside wall fountains are available in easy-to-use kits that will provide you all you need to properly install it. The kit contains a submersible pump, hoses as well as the basin, or reservoir. If the size is average, the basin can be hidden away among your garden plants. Once your wall fountain is in place, all that is needed is consistent cleaning and some light maintenance.

Change the water frequently so it is always clean. It is important to quickly remove debris such as leaves, twigs or other dreck. Extremely cold temperatures can damage your outdoor wall fountain so be sure to protect it during the winter months. If left outdoors, your pump could break as a result of freezing water, so bring it inside during the winter. To sum up, your outdoor wall fountain will continue to be a great add-on to your garden if you keep it well looked after and well maintained.

The Use of Outdoor Garden Fountains As Water Features

A water feature is one which is a big element through which water moves. The broad variety of models available range from a simple hanging wall fountain to an elaborate courtyard tiered fountain. Given that they are so variable, these decorative elements can be located either in your backyard or inside your home. Ponds and pools are also regarded as water features.

Look into placing a water element such as a garden wall fountain to your ample backyard, yoga studio, cozy patio, apartment balcony, or office space. In addition to helping you kick back, both sight and sound are enticed by the comforting sounds of a water feature.

With their aesthetically pleasing form you can also use them to enhance the style in your home or other living space. The sound of water produces serenity, covers up undesirable noises and also produces an entertaining water show.

Select from Countless Exterior Wall Fountain Styles

If you want to have a place to relax and add some pizzazz to a small area such as a patio or courtyard, wall fountains are perfect because they do not occupy much space. The myriad of styles in outdoor wall fountains, including traditional, classic, contemporary, or Asian, means that you can find the one best suited to your wishes. While there are innumerable prefabricated ones on the market, you may need a customized fountain if none of these are appealing to you.

Depending on your wishes, you can pick from mounted or freestanding models. Small, self-contained mounted wall fountains can be hung on any surface. One of the most important aspects of wall fountains is that they be lightweight, so they are typically made of fiberglass or resin to mirror the look of stone. Large-sized free-standing wall fountains, often referred to as floor fountains, have their basins positioned on the floor and a flat side leaning on a wall. Generally composed of cast stone, this kind of water feature is not limited in weight.

Many experienced landscapers prefer custom-built fountains which can be incorporated into a brand-new wall or an existing one. A expert mason is necessary to install the water basin against the wall and properly install all the plumbing inside or behind the wall. It is also essential to include a spout or fountain mask to build it into the wall. The cohesive look produced by custom-made wall fountains make them appear to be part of the scenery rather than an afterthought.

The Genesis Of Wall Fountains

A water fountain is an architectural piece that pours water into a basin or jets it high into the air in order to supply drinking water, as well as for decorative purposes.

From the onset, outdoor fountains were soley there to serve as functional elements. Inhabitants of cities, townships and small towns utilized them as a source of drinking water and a place to wash, which meant that fountains needed to be connected to nearby aqueduct or spring. Until the late 19th, century most water fountains operated using the force of gravity to allow water to flow or jet into the air, therefore, they needed a source of water such as a reservoir or aqueduct located higher than the fountain. Serving as an element of adornment and celebration, fountains also supplied clean, fresh drinking water. Bronze or stone masks of wildlife and heroes were commonly seen on Roman fountains.

During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to mimic the gardens of paradise. Fountains played a considerable role in the Gardens of Versailles, all part of French King Louis XIV’s desire to exercise his power over nature. The Popes of the 17th and 18th centuries were glorified with baroque style fountains made to mark the place of entry of Roman aqueducts.

Urban fountains created at the end of the 19th century functioned only as decorative and celebratory ornaments since indoor plumbing provided the essential drinking water. Gravity was substituted by mechanical pumps in order to enable fountains to bring in clean water and allow for beautiful water displays.

Modern fountains are used to adorn public spaces, honor individuals or events, and enhance recreational and entertainment events.

The Myriad Reasons to Add a Fountain

The area outside your residence can be polished up by including a wall or a garden fountain to your landscaping or garden project. Many modern designers and artisans have been influenced by historical fountains and water features. As such, introducing one of these to your interior is a great way to connect it to the past. The water and moisture garden fountains release into the environment draws birds and other creatures, and also balances the ecosystem, all of which add to the benefits of including one of these beautiful water features. Birds drawn to a fountain or bird bath often scare away irksome flying pests, for instance.

The area necessary for a cascading or spouting fountain is substantial, so a wall fountain is the perfect size for a small yard. Either a freestanding fountain with an even back and an attached basin set against a fence or a wall, or a wall-mounted kind which is self-contained and hangs on a wall, are some of the possibilities from which you can choose. Both a fountain mask placed on the existing wall as well as a basin located at the bottom to collect the water are equired if you wish to add a fountain. The plumbing and masonry work necessary for this kind of work requires know-how, so it is best to hire a skilled person rather than go at it yourself.

The Early Civilization: Outdoor Fountains

On the Greek island of Crete, excavations have unearthed channels of several types. They not solely helped with the water supply, they eliminated rainwater and wastewater as well. The primary ingredients used were stone or clay. There were terracotta pipelines, both circular and rectangle-shaped as well as waterways made from the same components. Among these were terracotta piping that were U shaped or a shortened, cone-like shape which have exclusively appeared in Minoan culture. Terracotta pipes were utilized to distribute water at Knossos Palace, running up to three meters below the floor surfaces. These Minoan water lines were additionally utilized for collecting and storing water, not just circulation. These terracotta piping were essential to perform: Underground Water Transportation: This particular system’s invisible nature may suggest that it was originally planned for some type of ritual or to circulate water to limited groups. Quality Water Transportation: Many scholars think that these pipelines were utilized to create a separate distribution technique for the palace.

The Best Type of Wall Fountain for Your Space

A great option for areas that do not have a lot of space to play with is a garden wall fountain. These decorative pieces are easy to install on any wall surface and do not take up a a great deal of room.

It is not hard to find one that works for you since there are many price levels and style alternatives on the market. You can choose from an array of colors and sizes as well. For anyone looking to add some pizzazz to their exterior walls, these stunning water fountains are a fantastic choice. Several fountains can be placed on the same wall if there is sufficient space as this will amplify the sounds of a waterfall.

Many options are out there if you want to get a garden fountain. The model you want and where to hang it are the first things to determine.


Backyard Elegance: Outdoor Garden Fountains
The most utilized materials used to construct garden wall fountains are stone and metal, even though they can be made out of any number of other materials. The most appropriate material for your water feature depends entirely on the design you choose. ... read more
The Myriad Designs of Wall Water Fountains
Custom-made fountains which can be integrated into a new or existing wall are often recommended by landscaping designers. Placing the basin against the wall and installing all the plumbing work requires a expert mason to... read more
Interior Wall Water Features are Ideal for Home or Workplace
You can relish in the peace and quiet after a long day at work and relax watching your favorite show while relaxing under your wall fountain. Indoor fountains produce harmonious sounds... read more
Putting in a Wall Water Feature in Your Residence
Water can be added as soon as the fountain has been positioned. Use sufficient water so that the pump is completely covered. Plug the pump into the wall and see the water begin to circulate. Gently put in more water until... read more