A Few Good Ways to Mount a Wall Water Feature

Make any room much better with a wall fountain. twf037-al__92279.jpg A waterfall will bring a sense of relaxation with the comforting sounds of trickling water. Foyers are common places for wall fountains, but they can also be installed in any common area. Although the instructions for installing one are fairly straightforward there will be small modifications depending on the model. Note that different components will need to be put together during assembly. You will need to connect the pump and tubing, and the base will need to be secured to the top part. Remember to review the directions before getting started in order to avert mistakes. The set-up technique is quite simple to understand. Keep in mind, though, that each model might need a slight adjustment. The easiest way to ensure it is positioned correctly is to recruit someone to hold it where you want it while you mark the wall. The best way to make sure it is mounted correctly is to use a level. Mark the position where you want the very top of the wall fountain as well as the lower part. Your wall fountain can be hung in one of two ways. You will find holes on the back side of the wall fountain which can be mounted directly onto the screws. Alternatively, you can affix brackets to the wall and use those. The second option is better suited, especially for heavier wall fountains. Make a mark on the wall where the brackets will best fit on your wall fountain. Use a drill to make the pilot holes on the wall for your drywall anchors. Insert the anchors by attentively hammering them into the wall. Use a cordless drill or a screwdriver to install the brackets, making sure they are straight. It is now time to put your wall fountain onto the mounting brackets. Check to see that it is in the ideal position and secure on the brackets. Add some water once the wall fountain is mounted. Use sufficient water so that the pump is completely submerged. Now plug it in and the water will start to flow. The water should fill the basin to within one inch of the top.

Note that it will overflow when not pumping if you fill it to the top. The water level will rise since it all settles at the bottom of the basin when not being pumped. Whenever there is too much water, it will spill out and can harm your flooring and furniture.

Landscape Fountains As Water Elements

A water feature is one which is a large element through which water runs. There is an extensive array of such features ranging something as simple as a suspended wall fountain or as complex as a courtyard tiered fountain. These products are so adaptable that they can be placed outside or indoors. Ponds and swimming pools are also included in the description of a water element.

A garden wall fountain can be a useful water element to add to any yard, yoga studio, patio, balcony, or office space. You can chill out to the softly cascading water in your fountain and gratify your senses of sight and sound. Their aesthetically pleasing shape accentuates the decor of any living space. The water’s soothing sounds contribute to a feeling of tranquility, cover up unpleasant noises, and provide a delightful water display.

Installation of a Fountain In Smaller Yards

The reflective properties of water means it can make smaller areas look larger than they are. Dark materials increase the refractive properties of a fountain or water feature. If your objective is to showcase your new feature at night, underwater lights in various colors and shapes will do the trick. Solar powered eco-lights are excellent during the day and submerged lights are perfect for nighttime use. Often utilized in natural therapies, they help to lessen anxiety and stress with their calming sounds.

The vegetation in your yard is a very good spot to fit in your water feature. People will be focused on the pond, artificial river or fountain in your yard. The flexibility of water features is that they can be set up in large backyards as well as in small verandas. The ambience can be significantly altered by placing it in the best place and using the proper accessories.

The Interesting Roots of the Wall Water Fountain

During his reign (1397-1455) of the Roman Catholic Church, the learned Pope Nicholas V commissioned scores of translations of ancient Greek classics into Latin. He also initiated the beautification of the city to make it into the worthy seat of the Christian world. In 1453 he commissioned the repairing of the Aqua Vergine, an historic Roman aqueduct which had carried clean drinking water into the city from many miles away. Nicholas V also undertook the building of mostras, an ancient Roman tradition of putting up imposing public fountains to indicate the terminal point of an aqueduct. The architect Leon Battista Alberti was commissioned by him to build a water fountain where we now find the wondrous Trevi Fountain. The adjustments, as well as the extensions included in the restored aqueduct, eventually made it possible to provide the Trevi Fountain and the well-known baroque fountains in the Piazza del Popolo and Piazza Navona with the necessary water to function.

Water Fountains: The Minoan Society

On the Greek island of Crete, excavations have discovered conduits of numerous kinds. These supplied water and removed it, including water from waste and deluges. They were commonly made from terracotta or stone. Terracotta was employed for canals and pipes, both rectangle-shaped and circular. These consisted of cone-like and U-shaped clay water lines which were unique to the Minoans. Knossos Palace had an sophisticated plumbing system made of terracotta pipes which ran up to three meters under ground.

The clay pipes were also utilized for gathering and storing water. Therefore, these pipelines had to be ready to: Subterranean Water Transportation: It’s not really understood why the Minoans required to move water without it being seen. Quality Water Transportation: There is also evidence which concludes the pipes being employed to supply water fountains separately of the domestic system.

Find Tranquility with Outdoor Fountains

Your state of mind is favorably influenced by having water in your garden. The noise in your neighborhood and surrounding area will be masked with the tranquil sounds of a fountain. This is a great spot to relax and experience the natural world around you. Bodies of water such as seas, oceans and rivers are commonly used in water therapies, as they are regarded as therapeutic. If what you seek out is a calming place where you can take your body and your mind to a faraway place, put in a pond or fountain in your garden.

The Origins Of Garden Fountains

The dramatic or ornamental effect of a fountain is just one of the purposes it fulfills, as well as supplying drinking water and adding a decorative touch to your property.

From the beginning, outdoor fountains were soley meant to serve as functional elements. Inhabitants of urban areas, townships and small towns utilized them as a source of drinking water and a place to wash up, which meant that fountains had to be connected to nearby aqueduct or spring. Used until the 19th century, in order for fountains to flow or shoot up into the air, their origin of water such as reservoirs or aqueducts, had to be higher than the water fountain in order to benefit from the power of gravity. Fountains were not only utilized as a water source for drinking water, but also to decorate homes and celebrate the artist who created it. Animals or heroes made of bronze or stone masks were often times used by Romans to beautify their fountains. During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to re-create the gardens of paradise. King Louis XIV of France wanted to demonstrate his superiority over nature by including fountains in the Gardens of Versailles. Seventeen and 18 century Popes sought to exalt their positions by adding decorative baroque-style fountains at the point where restored Roman aqueducts arrived into the city.

The end of the 19th century saw the rise in usage of indoor plumbing to supply drinking water, so urban fountains were relegated to strictly decorative elements. Fountains using mechanical pumps instead of gravity allowed fountains to deliver recycled water into living spaces as well as create special water effects.

Embellishing city parks, honoring people or events and entertaining, are some of the uses of modern-day fountains.

What Are Fountains Manufactured From?

While today’s garden fountains are made in a variety of materials, most are crafted from metal. Metallic models offer clean lines and unique sculptural accents and can accommodate nearly any decorative style and budget. The interior design of your house should establish the look and feel of your yard and garden as well.

Today, a lot of people elect copper for their sculptural garden fountains. Copper is appropriate for many fountain styles, including tabletop and cascade water fountains, and can be placed inside or outside - making it a great choice. Copper fountains also come in a wide array of designs - from fun and eccentric to modern and cutting-edge.

Brass water fountains are also common, although they tend to have a more conventional look than copper ones. Brass fountains are often designed with unique artwork, so they are popular even if they are a bit conventional.

Perhaps the most cutting-edge of all metals is stainless steel.

If you choose a cutting-edge steel design, both the value and tranquility of your garden will get a nice lift. Like all water fountains, you can get them in just about any size you choose.

Fiberglass is a popular material for fountains because you can get the look and feel of metal at a much lower price, and it is lightweight and easier to move than metal. It is simple to clean and maintain a fiberglass water fountain, yet another reason they are common.

The Myriad Models of Garden Wall Fountains

Small patios or courtyards are a perfect place to set up wall fountains since they add style to an area with little space. When considering the many types of outdoor wall fountains available including traditional, antique, contemporary, or Asian, you are certain to find one best suited to your design ideas. Your preferences dictate the type you buy so while there may not be a prefabricated fountain to satisfy you, you do have the option of having a custom made one.

Depending on your wishes, you can select from mounted or freestanding types. Mounted wall fountains are little and self-contained versions which can be placed on a wall. Fountains of this kind need to be lightweight, therefore, they are typically made of resin (resembling stone) or fiberglass. Large-sized free-standing wall fountains, commonly referred to as floor fountains, have their basins positioned on the floor and a flat side leaning on a wall. Generally constructed of cast stone, this kind of water feature is not restricted in weight.

It is a good idea to incorporate a custom-made fountain into a new or existing wall, something often suggested by landscape professionals. Installing the basin against the wall and installing all the plumbing work needs a professional mason to do it correctly. A fountain mask or a spout also needs to be integrated into the wall. A custom-made wall fountain blends into the landscape instead of standing out because it was a later addition, which contributes to a cohesive appearance.


Garden Fountains: The Minoan Society
On the Greek island of Crete, digs have unearthed channels of multiple sorts. They were used for water supply as well as removal of storm water and wastewater. Stone and terracotta were the... read more
Taking Care Of Large Garden Fountains
Replace the water frequently so it is always clean. Debris such as twigs, leaves or dirt should be cleaned up quickly. Furthermore, outdoor fountains should always be shielded from freezing temperatures ... read more
The Many Construction Materials of Garden Fountains
Fiberglass is a common material for fountains because you can get the look and feel of metal at a much lower price, and it is lighter weight and easier to move... read more