Putting up a Wall Water Element in Your House

wwlhcj_cp_1__44734.jpg Wall fountains can suit any area. The calming sound of the waterfall will de-stress and sooth. People tend to place their wall fountains in entryways, but, in fact, they can be a wonderful addition to any room where everyone congregates. How to install one varies a bit depending on the model, but there are some general directions that apply to all of them. There are usually several pieces that need to be assembled. The bottom and the upper portion will need to be put together as well as the pump and the tubing. The directions should be read first to make sure it is assembled properly. It is usually a straight-forward procedure. Note, however, that the guidelines for your specific model can vary slightly. The easiest way to ensure it is positioned correctly is to get somebody to hold it where you want it while you mark the wall. A level is the ideal to ensure it is hung straight. Mark the wall where you want the upper end of the wall fountain as well as the base. Your wall fountain can be mounted using one of two methods. There are slots on the back which can be placed onto the screws you put on the wall. Alternatively, you might want to attach brackets to the wall and use those. The bracket alternative is best, particularly for wall fountains that are big and bulky. Determine where the brackets need to be located and mark the wall accordingly. Make pilot holes in the wall for the drywall anchors. Insert the anchors by attentively hammering them into the wall. Attach the brackets by making sure they are straight and then screwing them into the wall using a drill or screwdriver. Then, pick up your unit and place it on the mounting brackets.

Check to see that it is in the proper position and safely on the brackets. Add some water once the wall fountain is ready. There will need to be adequate water to cover the water pump. Plug the pump into the wall and watch the water begin to circulate. Very carefully add just enough water to reach one inch below the top edge of the basin. Note that it will overflow when not pumping if you fill it to the top edge. The water level will rise since it all settles at the bottom of the basin when not getting pumped. Damage can be be the result if the water is overly full and spills down your wall.

Setting Up and Maintaining Garden Fountains

An important facet to think about is the size of the outdoor wall fountain in respect to the space in which you are going to install it. In order to hold up its total weight, a solid wall is required. Therefore for smaller areas or walls, a light feature is going to be more appropriate. In order for the fountain to have electrical power, a nearby electrical plug is needed. Since there are many varieties of outdoor wall fountains, installation procedures vary, but the majority include easy to follow instructions.

Generally, when you purchase an outdoor wall fountain, it will come in an easy-to-use kit that will include all the information needed to install it properly. In the kit you will find all the needed elements: a submersible pump, hoses and basin, or reservoir. Depending on its size, the basin can typically be hidden quite easily amongst the plants. Once your wall fountain is installed, all that is needed is regular cleaning and some light maintenance.

It is essential to replenish the water routinely so that it stays clean. Rubbish such as twigs, leaves or dirt should be cleaned up quickly. Ensure that your outdoor wall fountain is shielded from bitterly cold winter temperatures. Your pump may break when exposed to freezing water during the winter, so it is best to bring it indoors to avoid any damage. Simply put, your outdoor fountain will be a part of your life for many years with the correct care and maintenance.

Wall Water Fountains: So Many Styles to Pick From

When you are tight on space, a garden wall fountain is an ideal answer. These decorative pieces are easy to install on any wall surface and do not take up a a great deal of room. It is easy to find the perfect one as they come in a wide array of prices and styles. You can choose from a wide range of colors and sizes as well. Many people go for these charming water fountains because they add so much dazzle to their outside walls. If there is adequate wall space, you might consider buying multiple fountains as they will produce a lovely waterfall effect.

When it comes time to choosing a garden fountain, there are lots of options available. The type you want and where to install it are the first things to determine.

What Are Garden Fountains Manufactured From?

Garden fountains these days are typically made from metal, although you can find them in other materials too. Metals tend to produce clean lines and unique sculptural accents and can fit almost any style or budget. It is very important that your landscape design reflects the style of your residence.

At present, copper is quite popular for sculptural garden fountains. Copper is used in cascade and tabletop water fountains as well as many other styles, making it perfect for inside and outside fountains. Copper is also versatile enough that you can pick a range of styles for your fountain, from contemporary to whimsical.

If your style is more old-fashioned, a brass water fountain might work for you. Brass fountains are often designed with unique artwork, so they are popular even if they are a bit conventional.

Arguably the most contemporary of all metals is stainless steel. For an instantaneous increase in the value and peacefulness of your garden, get one of the contemporary steel designs. Like all water fountains, you can buy them in just about any size you want.

Because it is both lighter and less expensive than metal but has a comparable look, fiberglass is quite common for fountains. Caring for a fiberglass water fountain is quite easy, another benefit that consumers seek.

Outdoor Fountains And Their Use In Ancient Minoa

Archaeological excavations in Minoan Crete in Greece have exposed several types of channels. These delivered water and extracted it, including water from waste and storms. Stone and terracotta were the materials of choice for these conduits. There were terracotta conduits, both circular and rectangle-shaped as well as pathways made from the same elements. The cone-like and U-shaped terracotta conduits that were uncovered have not been spotted in any other society. Clay pipelines were utilized to administer water at Knossos Palace, running up to three meters directly below the floor surfaces. These Minoan water lines were also used for collecting and storing water, not just distribution. To make this feasible, the piping had to be tailored to handle:

Below ground Water Transportation: This system’s unseen nature may mean that it was primarily created for some type of ritual or to distribute water to limited groups. Quality Water Transportation: There’s also information which concludes the pipes being made use of to supply water fountains separately of the local process.

Deciding on the Perfect Spot for Your Water Feature

When you are choosing a water fountain, make sure you give some thought to where you will place it. The entryway to a hotel or building is a wonderful spot for them, as they offer a lovely welcome to guests.

Certain fountains are intentionally made to lean against a wall. If you look on the back, you will notice a bar or some other piece to secure it against a wall, grate or fence. There are many natural hazards such as wind or animals which can knock over your fountain if you do not securely affix it to the wall, so do not fail to do this as soon as possible.

In open-air places like parks where people tend to sit and unwind for a few minutes, you will notice one other option – the garden sculpture style.

The Rewards of Having an Interior Wall Water Element in your Home or Work Place

One way to accentuate your home with a modern twist is by putting in an indoor wall fountain to your living area. These kinds of fountains lower noise pollution in your home or office, thereby allowing your family and clients to have a worry-free and tranquil environment. Moreover, this kind of interior wall water feature will most likely gain the admiration of your staff as well as your clientele. All those who come close to your indoor water feature will be amazed and even your loudest detractor will be dazzled.

A wall fountain is a great addition to any residence because it offers a peaceful place where you sit and watch a favorite show after working all day. The benefits of an indoor water feature include its ability to emit negative ions with its gentle sounds and eliminate dust and pollen from the air while creating a calming environment.

Your Garden: An Ideal Spot for a Wall Fountain

You can perfect your outdoor area by including a wall fountain or an outdoor garden water feature to your property or gardening project. Contemporary artists and fountain builders alike use historic fountains and water features to shape their creations. Therefore, in order to connect your home to earlier times, include one these in your decor. In addition to the positive attributes of garden fountains, they also generate water and moisture which goes into the air, thereby, drawing in birds as well as other creatures and harmonizing the environment.

Birds drawn to a fountain or bird bath often frighten off irritating flying invaders, for instance.

Wall fountains are a good alternative if your yard is small because they do not need much space in comparison to a spouting or cascading fountain. Either a freestanding fountain with an even back and an attached basin set against a fence or a wall, or a wall-mounted kind which is self-contained and hangs on a wall, are some of the options from which you can choose. Make certain to include a fountain mask to an existing wall and a basin to collect the water at the bottom if you want to put in a fountain to your living area. It is best not to undertake this job on your own as skilled plumbers and masons are best suited to do this type of work.

The Broad Array of Outdoor Wall Fountains

Having a wall fountain in your backyard or on a veranda is ideal when you wish to relax. You can have one made to fit your specifications even if you have a minimum amount of space. A spout, a water basin, internal piping, and a pump are essential for freestanding as well as mounted types. Traditional, modern, antique, and Asian are just a few of the styles from which you can consider.

Also knownas a floor fountain, a stand-alone wall fountain is normally rather large, and its basin is installed on the ground.

It is possible to integrate a wall-mounted water feature onto an already existent wall or built into a new wall. The appearance of your landscape will seem more cohesive instead of disjointed when you install this kind of fountain.


The Early Culture: Fountains
On the Greek island of Crete, excavations have unearthed channels of several varieties. They were used for water supply as well as removal of storm water and wastewater. Stone and terracotta were the ingredients of choice... read more
Caring For Wall Water Fountains
It is essential to replenish the water regularly so that it remains clean. Remember to remove debris like leaves, twigs or dirt as quickly as possible. Furthermore, outdoor fountains... read more
A Wall Fountain to Suit Your Design
On the other hand, a water feature affixed to a wall can be integrated onto an existing wall or fit into a new wall. Integrating this type of water feature into your landscape brings a cohesiveness to the look you want... read more
Indoor Wall Water Fountains Can Benefit You
If you are looking for a water wall that best suits your families’ needs think about one of the many types available including a mounted waterfall, a stand-alone water feature or a custom-built fountain. Having a fountain in a ... read more